Loads
Medium-to-heavy and heavy loads, intensive wheeled traffic
Facilities
Warehouses, production, parking facilities, clean areas
Coating
Seamless, dust-free, easy to clean, chemical-resistant
LBC Industrial Floor · materials for industrial floors
Trowel pan Linolit® 1200.8.4 С (8 mounts, cold-rolled steel)
Use of Linolit® 1200.8.4 С trowel pans (8 mounts, cold-rolled steel) is required at the primary stage of leveling the concrete surface to obtain flatter floors.
Engineering support from estimation to commissioning
Warehouse in Tashkent, Muynakskaya St., 135. Shipping across Uzbekistan and Tajikistan.
Description
What makes the system different and what tasks it is typically chosen for.
Using Linolit® 1200.8.4 C trowel pans (8 mountings, cold-rolled steel) is necessary at the initial floating stage of concrete finishing to achieve flatter floors.
As a result, the concrete surface becomes matte and slightly rough.
Repeated treatment increases the surface strength of the concrete. The pan is made of special wear-resistant (cold-rolled) steel.
Compatibility
Trowel pans are adapted for use with concrete power trowels from the following manufacturers: Linolit, Hodman, Bartell, Whiteman, Allen, Kreber, Wacker, Enar, Coopter, and many others.
Features
Linolit® 1200.8.4 C (8 mountings, cold-rolled steel): fasteners are attached using spot welding to ensure high fastening reliability.
Versions
Linolit® 1200.8.4 C (8 mountings, cold-rolled steel) are produced in 2 versions:
- Standart
- Premium
Technical specifications
Material parameters and substrate requirements (TDS/passport).
| Diameter, mm | 1200 |
| Number of mountings, pcs | 8 |
| Material | cold-rolled steel |
| Thickness, mm | 3 |
| Edge bend angle, degrees | 45 |
Consumption
Estimated calculation based on area and thickness.
Documents
TDS, MSDS and system certificates.
- Документы пока не загружены
