LBC Industrial Floor · materials for industrial floors
Use of Linolit® 940.8.4 С trowel pans (8 mounts, cold-rolled steel) is required at the primary stage of leveling the concrete surface to obtain flatter floors.
Get product selection and project estimate
Warehouse in Tashkent, Muynakskaya St., 135. Shipping across Uzbekistan and Tajikistan.
Benefit 1
Помогает получить более ровный пол на первичной стадии заглаживания бетонной поверхности.
Benefit 2
При повторной обработке способствует повышению прочности поверхности бетона.
Benefit 3
Точечная сварка креплений направлена на повышение надёжности их фиксации.
Using Linolit® 940.8.4 C trowel pans (8 mountings, cold-rolled steel) is necessary at the initial floating stage of concrete finishing to achieve flatter floors.
As a result, the concrete surface becomes matte and slightly rough.
Repeated treatment increases the surface strength of the concrete. The pan is made of special wear-resistant (cold-rolled) steel.
Trowel pans are adapted for use with concrete power trowels from the following manufacturers: Linolit, Hodman, Bartell, Whiteman, Allen, Kreber, Wacker, Enar, Coopter, and many others.
Linolit® 940.8.4 C trowel pans: fasteners are attached using spot welding to ensure high fastening reliability.
Linolit® 940.8.4 C (8 mountings, cold-rolled steel) are produced in 2 versions:
| Disc weight, kg | 16.33 |
| Diameter, mm | 940 |
| Number of mountings, pcs | 8 |
| Material | cold-rolled steel |
| Thickness, mm | 3 |
| Edge bend angle, degrees | 45 |
Quick contact
Message us or leave a request — we will respond quickly.
