LBC Industrial Floor LBC Industrial Floor Industrial flooring — systems & materials
LBC Industrial Floor LBC Industrial Floor · materials for industrial floors

PRASPAN® CHEMFLOOR

The Praspan® Khimflor system is used under moderate and heavy mechanical and abrasive loads on floors.

Engineering support from estimation to commissioning

Warehouse in Tashkent, Muynakskaya St., 135. Shipping across Uzbekistan and Tajikistan.

PRASPAN® CHEMFLOOR
PRASPAN® CHEMFLOOR

Loads

Medium-to-heavy and heavy loads, intensive wheeled traffic

Facilities

Warehouses, production, parking facilities, clean areas

Coating

Seamless, dust-free, easy to clean, chemical-resistant

Description

What makes the system different and what tasks it is typically chosen for.

The Praspan® Khimflor system is used under moderate and heavy mechanical and abrasive loads on the floor. The coating is highly effective in areas where resistance to acidic, alkaline and mixed acid-alkali environments is required, such as chemical laboratories, chemical production workshops and spill areas for aggressive technical liquids.

The Praspan® Khimflor turnkey solution is a system consisting of the Praspan® UP-P100 primer reinforced with fiberglass and the chemically highly resistant Praspan® UP-C301 CP topcoat.

Key properties:

  • high strength;
  • resistance to abrasive, impact and chemical exposure;
  • excellent waterproofing properties;
  • seamless surface;
  • easy to clean;
  • ease of repair;
  • aesthetic appearance;
  • cost efficiency.

Chemical resistance

Water resistant
Fuels and lubricants resistant
Acids with non-oxidizing anions Sulfuric acid (solution):
15% resistant
92% conditionally resistant*
Acids with oxidizing anions Nitric acid (solution):
7% resistant
58% conditionally resistant*
Dilute alkalis (15%) conditionally resistant*
Hydroquinone resistant
Styrene resistant
Brominated organic compounds resistant
Alkali solution (15%) conditionally resistant*
Phosphoric acid (20%) resistant
HF (1%) resistant
Ethyl alcohol, various concentrations resistant
Acetone conditionally resistant*

*Slight surface marks may occur. There is no reduction in strength properties.

Technical specifications

Material parameters and substrate requirements (TDS/passport).

Compressive strength (MPa) min. 93,7
Tensile strength (MPa) min. 28,6
Resistance to water resistant
Resistance to mineral oil resistant
Resistance to 10% H₂SO₄ resistant
Resistance to 10% NaOH resistant
Spark generation non-sparking
Coating appearance smooth, even coating
Impact resistance of the floor coating (kg dropped from 1 m) 15

Consumption

Estimated calculation based on area and thickness.

Final figures are confirmed by an engineer based on the actual condition of the substrate.