LBC Industrial Floor LBC Industrial Floor Industrial flooring — systems & materials
LBC Industrial Floor LBC Industrial Floor · materials for industrial floors

PRASPAN® NEUTRAL

The Praspan® Neutral system is used under medium and heavy mechanical and abrasive loads.

Engineering support from estimation to commissioning

Warehouse in Tashkent, Muynakskaya St., 135. Shipping across Uzbekistan and Tajikistan.

PRASPAN® NEUTRAL
PRASPAN® NEUTRAL

Loads

Medium-to-heavy and heavy loads, intensive wheeled traffic

Facilities

Warehouses, production, parking facilities, clean areas

Coating

Seamless, dust-free, easy to clean, chemical-resistant

Description

What makes the system different and what tasks it is typically chosen for.

The Praspan® Neutral system is a floor coating with a smooth surface that withstands medium and heavy mechanical and abrasive loads. This turnkey solution is highly effective in industrial production areas, covered parking lots and garages, and warehouses. It is also suitable for facilities in the food, chemical and pharmaceutical industries.

The Praspan® Neutral system provides a glossy, odorless finish and is characterized by high strength.

The Praspan® Neutral turnkey solution is a system consisting of the PRASPAN® EP-P150 primer, the PRASPAN® EP-C150 base coat and the PRASPAN® EP-C251 topcoat.

Key properties:

  • forms a smooth glossy surface;
  • easy to clean;
  • high strength;
  • excellent chemical and mechanical resistance;
  • high wear resistance;
  • easy application;
  • wide choice of colors;
  • odorless;
  • excellent waterproofing properties.

Technical specifications

Material parameters and substrate requirements (TDS/passport).

Elongation at break (%) 5
Resistance to water resistant
Resistance to mineral oil resistant
Resistance to 10% H₂SO₄ resistant
Resistance to 10% NaOH resistant
Spark generation non-sparking
Coating appearance glossy
Adhesion to B15 class concrete in pull-off test (MPa) 2

Consumption

Estimated calculation based on area and thickness.

Final figures are confirmed by an engineer based on the actual condition of the substrate.