Loads
Medium-to-heavy and heavy loads, intensive wheeled traffic
Facilities
Warehouses, production, parking facilities, clean areas
Coating
Seamless, dust-free, easy to clean, chemical-resistant
LBC Industrial Floor · materials for industrial floors
Acrylic primer concentrate REFLOOR® AC-W100 (frost-resistant version available)
REFLOOR® AC-W100 is a one-component water-dispersion acrylic primer for preparing absorbent and non-absorbent substrates before coatings. It strengthens the surface, evens out absorbency and increases the adhesion of subsequent layers.
Engineering support from estimation to commissioning
Warehouse in Tashkent, Muynakskaya St., 135. Shipping across Uzbekistan and Tajikistan.
Description
What makes the system different and what tasks it is typically chosen for.
REFLOOR® AC-W100 is a one-component water-dispersion acrylic primer for preparing absorbent and non-absorbent substrates before coatings. It strengthens the surface, evens out absorbency and increases the adhesion of subsequent layers.
IMPORTANT: the standard AC-W100 version must NOT be frozen.
A frost-resistant version is available: AC-W100 Pro — freezing is allowed for no more than 5 cycles. Thaw at +20°C, avoiding any forced heating.
Used as a priming layer under self-leveling floors, repair mortars, adhesive and paint systems, and intended for treating:
• concrete, cement and gypsum substrates;
• brick, stone and aerated concrete surfaces;
• plasters, putties, gypsum plasterboard (drywall);
• old sound coatings before applying polymer compounds.
Advantages:
• universal — suitable for all types of mineral substrates;
• improves coating adhesion and reduces material consumption;
• ready to use or can be diluted with water (1:1);
• contains no organic solvents;
• neutral pH ≈ 7;
• suitable for exterior and interior work.
Material consumption:
• first coat: 0,1–0,2 l/m²;
• subsequent coats: 0,05–0,1 l/m².
IMPORTANT: the standard AC-W100 version must NOT be frozen.
A frost-resistant version is available: AC-W100 Pro — freezing is allowed for no more than 5 cycles. Thaw at +20°C, avoiding any forced heating.
Used as a priming layer under self-leveling floors, repair mortars, adhesive and paint systems, and intended for treating:
• concrete, cement and gypsum substrates;
• brick, stone and aerated concrete surfaces;
• plasters, putties, gypsum plasterboard (drywall);
• old sound coatings before applying polymer compounds.
Advantages:
• universal — suitable for all types of mineral substrates;
• improves coating adhesion and reduces material consumption;
• ready to use or can be diluted with water (1:1);
• contains no organic solvents;
• neutral pH ≈ 7;
• suitable for exterior and interior work.
Material consumption:
• first coat: 0,1–0,2 l/m²;
• subsequent coats: 0,05–0,1 l/m².
Technical specifications
Material parameters and substrate requirements (TDS/passport).
Appearance of the coating: transparent
Material consumption per 1 m²: 0,1–0,2 l for the first coat; 0,05–0,1 l for subsequent coats
Non-volatile content: ≈12%
Density: 1,0 kg/l
Viscosity: ≤ 15 s (VZ-246, Ø 6 mm, 20 °C)
pH: ≈7
Diluent: water
Dilution ratio: 1:1
Base: water-acrylic dispersion
Shelf life: 6 months in unopened original packaging
Material consumption per 1 m²: 0,1–0,2 l for the first coat; 0,05–0,1 l for subsequent coats
Non-volatile content: ≈12%
Density: 1,0 kg/l
Viscosity: ≤ 15 s (VZ-246, Ø 6 mm, 20 °C)
pH: ≈7
Diluent: water
Dilution ratio: 1:1
Base: water-acrylic dispersion
Shelf life: 6 months in unopened original packaging
Consumption
Estimated calculation based on area and thickness.
Documents
TDS, MSDS and system certificates.
- Документы пока не загружены
