LBC Industrial Floor LBC Industrial Floor Industrial flooring — systems & materials
LBC Industrial Floor LBC Industrial Floor · materials for industrial floors

Quartz dry shake topping REFLOOR® CT-S500

Refloor® CT-S500 quartz dry shake is a modified dry single-component cement-based compound for hardening concrete floor surfaces.

Engineering support from estimation to commissioning

Warehouse in Tashkent, Muynakskaya St., 135. Shipping across Uzbekistan and Tajikistan.

Quartz dry shake topping REFLOOR® CT-S500
Quartz dry shake topping REFLOOR® CT-S500
Quartz dry shake topping REFLOOR® CT-S500

Loads

Medium-to-heavy and heavy loads, intensive wheeled traffic

Facilities

Warehouses, production, parking facilities, clean areas

Coating

Seamless, dust-free, easy to clean, chemical-resistant

Description

What makes the system different and what tasks it is typically chosen for.

Refloor® CT-S500 quartz dry shake is a dry hardening compound consisting of Portland cement, graded quartz aggregate, modifying additives and pigment. It is supplied as a pre-blended dry mix for direct use by the “dry-on-wet” method. The material does not contain volatile solvents and is odorless. The technical characteristics of the material comply with GOST 31358-2007.

Supplied in 25 kg bags with original printed design.
Pallet weight: 1200 kg (48 bags).

Refloor® CT-S500 is intended for finishing the surface of freshly placed concrete floors in industrial and warehouse facilities, as well as on parking areas with intensive traffic where increased wear resistance of concrete floors is required.

Key properties:

  • densifies and hardens the concrete surface, reducing dusting;
  • extends the service life of the finished floor;
  • withstands medium and heavy traffic loads;
  • compressive strength after 28 days of curing at least 95 MPa;
  • abrasion loss on LKI-3M disc – 0.08 g/m²;
  • cost efficient.

Material consumption:

  • gray (natural) topping – 3–5 kg/m²;
  • colored topping – 8 kg/m².

Technical specifications

Material parameters and substrate requirements (TDS/passport).

Strength development period 28 days
Material consumption per 1 m² natural color – 3–5 kg, colored – 8 kg
Layer thickness 2–3 mm
Compressive strength after 28 days min. 100 MPa
Tensile strength after 28 days min. 10,5 MPa
Pull-off strength after 28 days 2,0 MPa
Bulk density of the mix 1850 kg/m³
Pedestrian traffic after 24 hours
Maximum aggregate size in dry mix 3,2 mm
Light load (up to 200 kg/cm²) after 7 days
Resistance to environmental aggressiveness non-aggressive and slightly aggressive according to SNiP 2.03.13
Resistance to liquid exposure intensity high according to SNiP 2.03.13
Shrinkage max. 0,09%
Service temperature, short-term exposure from −60°C to +300°C
Abrasion loss on LKI-3M disc 0,08 g/cm²
Impact resistance 25,0 kg/mm²

Consumption

Estimated calculation based on area and thickness.

Final figures are confirmed by an engineer based on the actual condition of the substrate.