High-strength cement–sand screed REFLOOR® SCREED 100

Refloor® Screed 100 is a dry cement–sand construction mix with mineral fillers for leveling substrates and creating a durable concrete topping at thicknesses up to 100 mm.

Refloor® Screed 100 is used as a standalone topping or as a preliminary leveling layer on concrete floor surfaces with subsequent installation of cement-based or polymer-based finish coatings. The material is a reliable solution for production areas and workshops where increased substrate strength is required, since after curing it is comparable to dense concrete of grade M500.

Key features:

• can be applied in layers up to 100 mm thick;
• after curing, comparable to dense concrete of grade M500;
• light traffic loads are possible after 7 days;
• resistant to debonding from the substrate (adhesion properties are maintained);
• levels areas with height differences up to 20 mm;
• non-shrink;
• can be used as a standalone finish layer or as a base for the final floor system.

The required thickness of the Refloor® Screed 100 layer is determined based on the specific service conditions. Information on the recommended layer thickness must be requested directly from the manufacturer.

45 kg kit:

• dry mix — 25 kg;
• coarse aggregate — 20 kg.

The material is a dry, free-flowing fine-grained mixture. Supplied in bags with original printed design.

Material consumption per 1 m²: 25,0 kg at a 10 mm layer thickness.