LBC Industrial Floor LBC Industrial Floor Industrial flooring — systems & materials
LBC Industrial Floor LBC Industrial Floor · Floors for car parks

Floors for car parks

Wear, abrasion from tyres, de‑icing chemicals and temperature swings. Anti‑slip ramps, fast commissioning and easy repair are essential.

We select an economically optimal solution for your facility

Warehouse in Tashkent, Muynakskaya St., 135. We work across Uzbekistan and Tajikistan. Average engineer response time is up to 15 minutes.

When this solution is suitable

Wear, abrasion from tyres, de‑icing chemicals and temperature swings. Anti‑slip ramps, fast commissioning and easy repair are essential.

Floors for car parks
  • • areas with heavy equipment traffic (forklifts, pallet trucks, trolleys);
  • • receiving/shipping areas, gates, ramps (if any);
  • • manual work, picking and packing areas;
  • • facilities with strict cleanliness and dust-control requirements (pharma, food);
  • • facilities with tight commissioning deadlines;
  • • where the concrete is already dusting or damaged;
  • • areas exposed to chemicals (oils, reagents, detergents);
  • • projects at the construction stage, where the floor system can be specified from the start.

Recommended floor systems for different zones

Baseline decision matrix: the final floor system and thickness are confirmed after analysing the substrate condition and loads for a specific site.

Zone Floor system Loads and conditions Time to service
Indoor parking levels Epoxy system 2–3 mm (R10–R11)

Seamless 2–3 mm epoxy flooring system for dry and moderately damp areas. Resistant to cleaning and alkaline solutions; adjustable surface roughness up to R11.

R10–R11 · $$

PRASPAN® PARKING system for internal levels: seamless and easy to clean; quartz broadcasting is possible for turns and anti‑slip. ~48 h
Existing concrete: reduce dusting and densify the parking surface Concrete impregnation (dust-proofing)

Mineralizing concrete sealer to reduce dusting and absorption of existing concrete. Budget-friendly solution without stopping operations.

R9–R10 · $

A mineralizing impregnation reduces dusting, increases surface density and makes cleaning easier. 6–24 h
Entrances/ramps/open areas: reduce concrete water absorption Concrete impregnation (hydrophobic treatment)

Hydrophobic impregnation to protect concrete from water and dirt. Reduces absorbency and makes cleaning easier.

R9–R10 · $

A hydrophobic impregnation reduces absorption, lowers staining and helps protect concrete from moisture and de‑icing chemicals. 6–24 h
New parking slabs Topping on fresh concrete (surface hardening)

Dry-shake hardener (quartz/corundum) applied to fresh concrete to increase abrasion resistance and reduce dusting.

R9–R10 · $$

Strengthening the top layer on fresh concrete. All topping types are available: quartz, corundum, metal/antistatic and non‑sparking — selected based on loads. depends on concrete

Floor system options are selected individually. Several coating types can be combined within one facility under a single specification and detailing for joints and transitions.

Need an estimate for a warehouse floor or an engineer consultation?

Fill out the short form — we’ll get in touch, clarify the facility details, and propose a technically sound and economically justified floor solution.

  • • we openly advise against over-specified or clearly weak systems;
  • • we calculate material consumption and provide an indicative budget;
  • • we help you prepare a technical brief for the designer and contractor.

We will contact you during business hours within 15 minutes to clarify details and prepare a proposal.