LBC Industrial Floor LBC Industrial Floor Industrial flooring — systems & materials
LBC Industrial Floor LBC Industrial Floor · Floors for the petrochemical industry

Floors for the petrochemical industry

Coatings for refineries and oil depots: oils/fuels, reagents, frequent washdown. Key requirements are chemical resistance, oil/fuel resistance and wear resistance.

We select an economically optimal solution for your facility

Warehouse in Tashkent, Muynakskaya St., 135. We work across Uzbekistan and Tajikistan. Average engineer response time is up to 15 minutes.

When this solution is suitable

Coatings for refineries and oil depots: oils/fuels, reagents, frequent washdown. Key requirements are chemical resistance, oil/fuel resistance and wear resistance.

Floors for the petrochemical industry
  • • areas with heavy equipment traffic (forklifts, pallet trucks, trolleys);
  • • receiving/shipping areas, gates, ramps (if any);
  • • manual work, picking and packing areas;
  • • facilities with strict cleanliness and dust-control requirements (pharma, food);
  • • facilities with tight commissioning deadlines;
  • • where the concrete is already dusting or damaged;
  • • areas exposed to chemicals (oils, reagents, detergents);
  • • projects at the construction stage, where the floor system can be specified from the start.

Recommended floor systems for different zones

Baseline decision matrix: the final floor system and thickness are confirmed after analysing the substrate condition and loads for a specific site.

Zone Floor system Loads and conditions Time to service
Агрессивные зоны: разливы, горячая мойка, термошок Lincrete ST

Thick-layer PU-cement coating for hot wash-down, thermal shock and aggressive chemicals. Adjustable anti-slip profile up to R13.

R11–R13 · $$$$

PU‑цемент 6–9 мм: для самых жёстких режимов (химия/масла/температурные воздействия). 8–24 h
Производственные зоны: реагенты, частая мойка Lincrete SL

Lincrete® SL is a four-component self-levelling polyurethane-cement mortar for concrete floors, forming a chemical-resistant 4–6 mm coating for the food and chemical industries.

R11–R13 · $$$

PU‑цемент 4–6 мм: высокая химстойкость и износостойкость. 8–24 h
Лаборатории / умеренные нагрузки Lincrete SL2

Lincrete® SL2 is a thin-section four-component self-levelling polyurethane-cement mortar for concrete floors. It forms a chemical-resistant 2–4 mm coating used in the food and chemical industries.

R11–R13 · $$

PU‑цемент 2–4 мм: устойчивость к реагентам и моющим средствам, удобен в уборке. 8–24 h
Сухие техпомещения / умеренная химия Epoxy system 2–3 mm (R10–R11)

Seamless 2–3 mm epoxy flooring system for dry and moderately damp areas. Resistant to cleaning and alkaline solutions; adjustable surface roughness up to R11.

R10–R11 · $$

Эпоксид 2–3 мм: наливной, можно усиливать кварцем по требованиям. ~48 h

Floor system options are selected individually. Several coating types can be combined within one facility under a single specification and detailing for joints and transitions.

Need an estimate for a warehouse floor or an engineer consultation?

Fill out the short form — we’ll get in touch, clarify the facility details, and propose a technically sound and economically justified floor solution.

  • • we openly advise against over-specified or clearly weak systems;
  • • we calculate material consumption and provide an indicative budget;
  • • we help you prepare a technical brief for the designer and contractor.

We will contact you during business hours within 15 minutes to clarify details and prepare a proposal.