LBC Industrial Floor LBC Industrial Floor Industrial flooring — systems & materials
LBC Industrial Floor LBC Industrial Floor · Floors for production workshops

Floors for production workshops

Wheel loads, local spills, safety requirements. We select the system by zones and operating modes.

We select an economically optimal solution for your facility

Warehouse in Tashkent, Muynakskaya St., 135. We work across Uzbekistan and Tajikistan. Average engineer response time is up to 15 minutes.

When this solution is suitable

Wheel loads, local spills, safety requirements. We select the system by zones and operating modes.

Floors for production workshops
  • • areas with heavy equipment traffic (forklifts, pallet trucks, trolleys);
  • • receiving/shipping areas, gates, ramps (if any);
  • • manual work, picking and packing areas;
  • • facilities with strict cleanliness and dust-control requirements (pharma, food);
  • • facilities with tight commissioning deadlines;
  • • where the concrete is already dusting or damaged;
  • • areas exposed to chemicals (oils, reagents, detergents);
  • • projects at the construction stage, where the floor system can be specified from the start.

Recommended floor systems for different zones

Baseline decision matrix: the final floor system and thickness are confirmed after analysing the substrate condition and loads for a specific site.

Zone Floor system Loads and conditions Time to service
Dry/moderately wet areas Epoxy system 2–3 mm (R10–R11)

Seamless 2–3 mm epoxy flooring system for dry and moderately damp areas. Resistant to cleaning and alkaline solutions; adjustable surface roughness up to R11.

R10–R11 · $$

Seamless and repairable; R11 with quartz broadcasting. ~48 h
Hot washdown / fats / acids Lincrete ST

Thick-layer PU-cement coating for hot wash-down, thermal shock and aggressive chemicals. Adjustable anti-slip profile up to R13.

R11–R13 · $$$$

High chemical and thermal resistance. 8–24 h
New concrete floors Topping on fresh concrete (surface hardening)

Dry-shake hardener (quartz/corundum) applied to fresh concrete to increase abrasion resistance and reduce dusting.

R9–R10 · $$

Top-layer hardening during construction. depends on concrete
Electronics assembly, areas with ESD requirements ESD epoxy system 2–3 mm

Antistatic epoxy coating with controlled resistance for clean and hazardous (explosive) areas. Works as part of an ESD system with conductive layers and grounding.

R9–R10

Used when static charge dissipation and resistance control (ESD) are required. 24–48 h
Ремонт/обновление ESD‑покрытий ESD paint — antistatic epoxy coating

Antistatic epoxy paint for concrete and polymer coatings. Used as a thin static-dissipative (ESD) coating for marking and refreshing antistatic zones.

R9–R10 · $$

Антистатическая краска: обновление и локальные ремонты ESD‑слоя (по требованиям участка). 24–48 h

Floor system options are selected individually. Several coating types can be combined within one facility under a single specification and detailing for joints and transitions.

Need an estimate for a warehouse floor or an engineer consultation?

Fill out the short form — we’ll get in touch, clarify the facility details, and propose a technically sound and economically justified floor solution.

  • • we openly advise against over-specified or clearly weak systems;
  • • we calculate material consumption and provide an indicative budget;
  • • we help you prepare a technical brief for the designer and contractor.

We will contact you during business hours within 15 minutes to clarify details and prepare a proposal.