System photo
Anti-static system
ESD paint — antistatic epoxy coating
Antistatic epoxy paint for concrete and polymer coatings. Used as a thin static-dissipative (ESD) coating for marking and refreshing antistatic zones.
Antistatic epoxy paint for concrete and polymer coatings. Used as a thin static-dissipative (ESD) coating for marking and refreshing antistatic zones.
Resistance/modes: wet areas.
System layers (bottom to top)
-
Грунт антистатический (эпоксидный) consumption: ≈ 0.2–0.3 kg/m²Подготовка основания, обеспыливание и нанесение антистатического грунта. При необходимости — локальное выравнивание/шпатлевание. Точный расход и требования к основанию уточняются по ТДС выбранного грунта.
-
ESD-краска (эпоксидная), 1–2 слояТонкослойное токорассеивающее покрытие. Конкретный расход и число слоёв уточняется инженером по ТДС и условиям эксплуатации.
Technical characteristics
- Commissioning
- see TDS
- Wet areas
- yes
- Thermal shock
- no
- Low temperature
- no
- Oils/fats
- limited
- Alkalis
- limited
- Acids
- limited
Note: exact values (chemical resistance, temperature limits, substrate requirements) are defined by the TDS and project specs.
Consumption & rough estimate
- Грунт антистатический (эпоксидный): ≈ 0.2–0.3 kg/m²
-
Total for system: ≈ 0.2–0.3 kg/m²(excluding losses).
Actual consumption depends on substrate condition, porosity and required texture. Pricing is calculated individually considering logistics and volume discounts.
Compatible materials (SKU)
Example system build-ups. Final material selection depends on the TDS and project conditions.
The final system build-up is fixed in the working specification and approved with design & facility teams.
System FAQ
What are the substrate requirements?
Requirements depend on the system type. Typically strength, moisture and adhesion are checked. Exact values are in the TDS and working specification.
Want the same floor or a cost estimate for your facility?
Send a floor plan and a brief description of the loads. Our engineer will select the optimal floor system, calculate material consumption, and provide an indicative budget.
